Can You Master a Song Properly With Just AirPods?
Published · updated · by Loopin
AirPods aren't designed for critical mastering decisions — they apply their own processing and have a consumer-tuned sound signature. But if they're genuinely all you have, there are ways to work around the limitations.
Understand what's working against you
AirPods apply adaptive EQ and, depending on settings, spatial audio processing that colors what you hear compared to a flat, accurate reference. This means decisions you make by ear on AirPods may not translate the way you expect on other systems.
Check whether any processing features can be disabled in your device's audio settings — a flatter, less processed listening mode gets you closer to what you actually need for critical decisions.
Compensate with more references, not fewer
Since you can't fully trust your own tonal judgment on AirPods alone, lean more heavily on level-matched reference tracks — comparing relative differences between your master and a trusted reference is more reliable than judging absolute tone on a colored listening system.
This shifts the task from "does this sound right" to "does this sound closer to or further from the reference," which is a more achievable judgment on a non-neutral system.
Trust loudness meters over your ears more than usual
LUFS and true-peak readings are objective regardless of what you're listening on — lean on these numbers more heavily than you would with accurate monitors, since your subjective sense of loudness on AirPods is less reliable for fine mastering decisions.
Get the numbers right first, then use your ears mainly for catching obvious problems rather than fine-tuning subtle tonal balance decisions.
Do a final check on a second device before finalizing
Before calling a master finished, listen on at least one different device — a friend's phone speaker, a laptop, anything with a different sound signature than your AirPods. This catches anything that might be specifically flattered or hidden by AirPods' particular processing.
This single extra check matters more when your primary listening device has known limitations for critical work, and it's a low-cost way to catch a significant category of potential mistakes.
Know when the limitation genuinely matters
For a rough mix check or a quick loudness comparison, AirPods are perfectly fine. For fine, detailed EQ decisions on a track you care deeply about getting right, the limitations become more consequential, and it's worth borrowing better headphones or monitors even just for the final critical pass.
Match the tool to the stakes — not every mastering decision needs studio-grade monitoring, but the most important ones benefit from it.
Frequently asked questions
Is it possible to master a song well using only AirPods?
It's possible with real limitations. AirPods apply their own adaptive processing, which colors critical listening decisions. Leaning more heavily on loudness meters and reference tracks, and doing a final check on a second device, helps compensate.
Should I disable AirPods processing features for mastering?
Check your device's audio settings for a flatter listening mode with less processing -- this gets you closer to what critical mastering decisions actually need than the fully processed default.
What should I trust more than my ears when mastering on AirPods?
LUFS and true-peak meter readings, which are objective regardless of playback device. Use them to get the numbers right first, then reserve your ears mainly for catching obvious problems.